|ORIGINAL RESEARCH ARTICLE
|Year : 2018 | Volume
| Issue : 1 | Page : 24-32
Microcapsule-based chronomodulated drug delivery systems of montelukast sodium in the treatment of nocturnal asthma
Vuppalapati Lavakumar1, Cherukuri Sowmya1, Narayanan Venkateshan1, Velayutham Ravichandiran2, Kagithakara Vajravelu Leela3, Narayanaswamy Harikrishanan4, Jayaraman Anbu5
1 Drug Delivery and Nanotechnology Laboratory(DDNL), Department of Pharmaceutics, Arulmigu Kalasalingam College of Pharmacy, Anand Nagar, Krishnankoil, Srivilliputtur, Virudhunagar, Tamilnadu, India
2 National Institute of Pharmaceutical Education and Research, Kolkata, West Bengal, India
3 Department of Microbiology, Government Kilpauk Medical College, Chennai, Tamil Nadu, India
4 Department of Pharmaceutical Analysis, Dr. MGR. Medical Research and Educational Center, Maduravoyil, Chennai, India
5 Department of Pharmacology, MS Ramaiah University of Applied Sciences, Bengaluru, Karnataka, India
|Date of Web Publication||11-Jul-2018|
Dr. Cherukuri Sowmya
Department of Pharmaceutics, Arulmigu Kalasalingam College of Pharmacy, Anand Nagar, Krishnankoil, Srivilliputtur, Virudhunagr - 626 126, Tamil Nadu
Source of Support: None, Conflict of Interest: None
Background: Asthma is a chronic disease characterized by repeated attacks of breathlessness and wheezing, which occurs principally during night. This is due to circadian changes in ventilation and airway responsiveness. Hence, the chronomodulated therapy is more considering in the treatment of nocturnal asthma.
Objective: The objective of the study was to prepare microcapsule-based chronomodulated drug delivery system of montelukast sodium (MLS) for the treatment of nocturnal asthma.
Materials and Methods: Five batches of MLS microcapsules were prepared using pH-dependent polymer combination of Eudragit® S-100 with L-100. The optimized batch microcapsules were enclosed in a capsule to obtain chronomodulated pulsincap systems (CMPSs). In this system, natural gums were used as hydrogel plugs to achieve the required time lag. Microcapsules and CMPSs have been evaluated for their characteristic properties.
Results: The developed microcapsules are spherical in shape with smooth surfaces. In vitro release studies predicted that M4 and M5 batches could control the drug release for a period of 12 h. The optimized batch microcapsules (M4) were used in the preparation of CMPSs. The natural hydrogel plugs, i.e. xanthan gum, gum kondagogu, and guargum used in CMPSs showed approximate lag phase of 5, 6, and 5.5 h and drug releases up to 16, 24, and 24 h, respectively.
Conclusion: CMPSs containing Eudragit® microcapsules of MLS with programmable lag phase and prolonged drug release were successfully developed using natural gums as hydrogel plugs, which congregates the demands of chronomodulated therapy in asthma.
Keywords: Chronomodulated pulsincap systems, chronotherapy, cross-linked gelatin capsules, hydrogel plug, lag phase, pH-dependent polymer
|How to cite this article:|
Lavakumar V, Sowmya C, Venkateshan N, Ravichandiran V, Leela KV, Harikrishanan N, Anbu J. Microcapsule-based chronomodulated drug delivery systems of montelukast sodium in the treatment of nocturnal asthma. Int J Pharma Investig 2018;8:24-32
|How to cite this URL:|
Lavakumar V, Sowmya C, Venkateshan N, Ravichandiran V, Leela KV, Harikrishanan N, Anbu J. Microcapsule-based chronomodulated drug delivery systems of montelukast sodium in the treatment of nocturnal asthma. Int J Pharma Investig [serial online] 2018 [cited 2019 Jun 17];8:24-32. Available from: http://www.jpionline.org/text.asp?2018/8/1/24/236378
| Introduction|| |
The current statistics of WHO states that there are 235 million people suffering from asthma worldwide. It is a chronic disease characterized by repeated attacks of breathlessness and wheezing. These symptoms are getting worse during dark.,,, The main contributing factors of that state are circadian changes in ventilation, airway responsiveness and inflammation, mucociliary clearance, and changes in hormonal levels. Hence, the chronotherapy associated delivery systems are booming in the treatment of nocturnal asthma which are designed to release the drug and elicit the action after the programmable lag time at the time of necessity., Chronotherapy refers to a treatment method in which in vivo drug availability is correlated with the circadian rhythm of disease to optimize therapeutic outcomes and to limit the side effects., Among various delayed release systems, pulsatile drug delivery systems proved successful because of their spatial and temporal drug delivery in their inherent excellence in achieving chronotherapeutic goals. Chronotherapeutic goals can be achieved by designing of colon-specific delayed release systems., For the design of colon-specific chronomodulated systems, a range of strategies are available; among them, time dependent, pH dependent, bacterial triggered, and pressure controlled are thoroughly studied.,, By challenging the traditional view, recent studies confirm that the colon has lower pH value (6.8) than the small intestine (7.0–7.8), and it takes about 5–6 h to reach the dosage form to an ileocecal junction. In view of delayed time and variations of pH in the Gastro Intestinal Tract (GIT), the mutual pH- and time-dependent pulsatile device was designed for colon-specific delivery which is a chronopharmaceutical approach to treat the diseases which follow circadian rhythm like asthma. Hence, the present study was aimed to fabricate chronomodulated pulsincap systems (CMPSs) which consist of insoluble, nondisintegrating capsule body and soluble cap., The body of the capsule is filled with microcapsules of the montelukast sodium (MLS) which were prepared by using pH-sensitive Eudragits ®; the prior release of drug core in the small intestine was prevented by a swellable hydrogel plugs which separate the body and cap. The entire capsule was enteric coated to prevent its dissolution in the stomach. After administration, the enteric coat of the capsule will dissolve in the small intestine, and hydrogel plug starts swelling. On complete swelling, the hydrogel plug will be ejected from the capsule body and facilitates the release of MLS microcapsules into the colon. The free microcapsules will release the drug for an extended period of time for the prolonged treatment in nocturnal asthma. Prolonged release is essential to prevent the signs and symptoms of asthma and associated early morning rhinitis.
Chemically, MLS is R-(E)]-1-[1-[3-[2-(7-chloro -2-quinolinyl)ethenyl]phenyl]-3- [2-(1-hydroxy -1-methylethyl) phenyl] propyl] thio] methyl] cyclopropaneacetic acid monosodium salt. It is an orally effective antiasthmatic drug for adults and children. It acts by inhibiting the physiological actions of cysteinyl leukotrienes (LTC4, LTD4, and LTE4). The properties of MLS such as extensive presystemic metabolism and higher absorption in alkaline pH allow to design into CMPSs to meet the objective of delivery of drug to the colon for the treatment of nocturnal asthma. Moreover, the microencapsulation of MLS in the present study aids in increasing the stability of hygroscopic MLS along with achieving prolonged release.
| Materials and Methods|| |
MLS was gifted from RA Chem Pharma Ltd., Hyderabad, India. Eudragit ® L-100 and Eudragit ® S-100 were obtained as a gift sample from Strides Arcolab Ltd, Bangalore. Xanthan gum and guar gum were procured from Finoso Pharma Private Limited, Hyderabad. Cellulose acetate phthalate (CAP) for enteric coating was purchased from Hi media, Mumbai. All other chemicals were procured from Qualigens, Mumbai, which include heavy liquid paraffin, Span-80, dibutyl phthalate, acetone, and petroleum ether were of analytical grade.
Fourier-transform infrared and differential scanning calorimetry studies
Fourier transform infrared (FT-IR) and differential scanning calorimetry (DSC) studies were performed to study the interactions between the drug and excipient mixtures. FT-IR spectral studies were performed using Bruker alpha M15 FT-IR spectrophotometer using OPUS 6.5 software. DSC analysis was conducted using Mettler Toledo 822E calorimeter.
Preparation of microcapsules
MLS microcapsules were prepared by emulsion solvent evaporation method developed by Alavi et al., 2002. Briefly, weighed quantities of Eudragit ® L-100, Eudragit ® S-100, and drug were dissolved in 10 ml of acetone and emulsify the solution in liquid paraffin containing 1% (W/W) of Span-80 as emulsifying agent. Five batches of microcapsules were prepared by using different core to coat ratios and were coded as M1, M2, M3, M4, and M5 and stored at desiccator for further evaluation.
Particle size and morphology
The particle size of MLS microcapsules was examined using optical microscopy. The shape and surface textures were studied using scanning electron microscopy (SEM); Carl Zeiss EVO MA-15 instrument with 20 kW power and photographs were taken by random scanning method.
Microcapsule wall thickness
The average thickness of the wall that surrounds the drug particles was determined by the method of Luu et al., using the following equation:
h = (r̅ [1-p] d1/3 [pd2+ [1-p] d1), where, h is the wall thickness, r̅ is the mean radius of the microcapsules, d1 is the density of the core material, d2 is the density of the coat material, and P is the portion of the medicament in the microcapsules.
Drug content and microencapsulation efficiency
Drug content was determined by crushing of microcapsules followed by estimating the concentration of drug in phosphate buffer of pH 6.8 using ultraviolet (UV)-visible spectrophotometry. Encapsulation efficiency was calculated using the following equation:
Percentage of encapsulation efficiency =
In vitro drug release studies
In vitro drug release studies were conducted by employing USP XXXIII rotating basket apparatus; microcapsules equivalent to 10 mg of MLS were taken in a basket by packing them in a dialysis bag (12,000 molecular weight cutoff) in 900 ml of pH 6.8 phosphate buffer as medium at 37°C with a basket speed of 100 rpm and samples were analyzed by using UV spectrophotometer. Cumulative amounts of drug release were calculated and dissolution profiles were constructed.
Formulation of chronomodulated pulsincap systems
Preparation of cross-linked gelatin capsules
Cross-linked gelatin capsule bodies were prepared by treating the separated capsule bodies with formaldehyde to make them water insoluble. Over 100 gelatin capsule bodies of 350 mg capacity were made insoluble by cross linking of gelatin with aldehyde. The treated capsule bodies were joined with soluble caps and kept safe for further studies. Treated microcapsules were tested for free formaldehyde content according to the method reported by Mastiholimath et al.
Development of chronomodulated pulsincap systems
The cross-linked capsule bodies were separated manually and were filled with Eudragit ® microcapsules equivalent to 10 mg of MLS. Filled capsule bodies were closed with natural hydrogel-forming gums such as xanthan gum, gum kondagogu, and guargum and the capsules were locked using 5% w/v ethanolic solution of ethyl cellulose. Meanwhile, the obtained capsules were enteric coated by dipping in 5% w/v solution of CAP in acetone to avoid disintegration of capsule in the stomach. The percentage of weight gain of capsules after the CAP coating was calculated., By considering the characterization studies of microcapsules, M4 batch microcapsules were chosen in fabrication of CMPSs. Nine batches of CMPSs (F1, F2, F3, F4, F5, F6, F7, F8, and F9) were prepared using three concentrations, namely 10, 20, and 30 mg of gums mixed with 10 mg of lactose monohydrate as a common filler. Fabrication details of the CMPS systems are given in [Table 1].
Evaluation of fabricated chronomodulated pulsincap systems
Ten modified pulsincap capsules were taken randomly and evaluated for weight variation. Thickness of the CAP coating was determined using digital screw gauge.
In vitro drug release studies of developed chronomodulated pulsincap systems
In vitro drug release studies were performed using USP XXXIII rotating paddle apparatus. Capsules were tied to paddle with a cotton thread to facilitate the capsule immersion to avoid the floating on dissolution media. Three different buffers of pH 1.2, 7.4, and 6.8 were used sequentially as dissolution media to simulate the variable pH of the GIT, designated as a sequential pH change media ,, at 37°C with paddle rotation of 100 rpm using 900 ml of media. Samples were analyzed spectrophotometrically by measuring the absorbance at 346 nm and constructed the dissolution profiles.
| Results|| |
Drug excipient compatibility studies
FT-IR spectrum of drug exhibited broad peak around 3300 cm −1 indicated the presence of tertiary hydroxyl groups, strong peak near 1700 cm −1 indicates the presence of carboxylic acid group, and aromatic C-H peaks are observed between 2900 and 3000 cm −1. FT-IR spectra of drug, placebo, and drug excipient mixture are shown in [Figure 1]a,[Figure 1]b,[Figure 1]c. The DSC thermogram of pure drug showed the endothermic peak at 122.96°C, and the thermogram of drug excipient mixture showed the endothermic peak at 126.33°C. DSC thermograms of drug, placebo, and drug excipient mixture are shown in [Figure 2]a,[Figure 2]b,[Figure 2]c.
|Figure 1: Fourier-transform infrared spectrum of (a) pure montelukast sodium (b) placebo mixture (c) drug and excipient mixture|
Click here to view
|Figure 2: Differential scanning calorimetry thermograms of (a) pure montelukast sodium (b) placebo mixture (c) drug and excipient mixture|
Click here to view
Characterization of Eudragit ® microcapsules
Optical microscopic studies revealed that the size of microcapsules was ranging from 40 to 160 μm, wall thickness was from 13.8 to 40.2 μm, drug content was >90%, and microencapsulation efficiency was found to be >79%. SEM photographs are shown in [Figure 3].
|Figure 3: Scanning electron microscopy pictures of montelukast sodium microcapsules for (a) M1, (b) M2, (c) M4, and (d) M5 formulations|
Click here to view
In vitro drug release studies of montelukast sodium microcapsules
In vitro drug release studies on MLS microcapsules were performed using USP XXXIII dissolution apparatus (rotating basket). The weight of microcapsules was considered to conduct dissolution studies which were calculated on the basis of drug content values. Dissolution profiles of microcapsules are shown in [Figure 4]. In order to understand the release kinetics and its mechanisms, the in vitro dissolution profiles were analyzed by means of various kinetic models such as of zero order, first order, Higuchi, and Peppas kinetics. In the first 30 min, the percentage of drug release was 40.8%, 37.4%, 33.2%, 26.7%, and 20.33% for M1, M2, M3, M4, and M5, respectively. At the end of 24 h, the cumulative percent of drug release was 98.61 ± 0.35, 99.31 ± 0.2, 99.00 ± 0.44, 98.23 ± 0.4, and 94.45 ± 0.12 form M1 in 6 h, M2 in 8 h, M3 in 10 h, M4 in 12 h, and M5 in 12 h, respectively. The correlation coefficient values of kinetic models and “n” value of Peppas are given in [Table 2].
|Figure 4: Comparative in vitro release profiles of prepared montelukast sodium microcapsules|
Click here to view
|Table 2: Results of drug content and encapsulation efficiency, microcapsule size, and wall thickness of montelukast sodium microcapsules|
Click here to view
Evaluation of chronomodulated pulsincap systems
The weight of the capsules was ranging from 300 to 350 mg and the thickness of the CAP coat on the capsule was ranging from 1.5 to 2.5 μm. The results of content of free formaldehyde testing on cross-linked capsule bodies have shown lesser color intensity of the test solution when compared with the standard formaldehyde solution. The in vitro drug release profiles of CMPs, F1, F2, F3, F4, F5, F6, F7, F8, and F9 are displayed in [Figure 5]a,[Figure 5]b,[Figure 5]c. At the end of 5 h, F1, F2, F3, F4, F5, F7, F8, and F9 showed 15.2%, 10.8%, 6.4%, 4.8%, 2.5%, 7.2%, 2.8%, and 0.9% of drug release whereas F6 did not show any drug release at that time.
|Figure 5: Comparative in vitro release profiles of designed chronomodulated pulsincap systems: (a) F1, F2, F3 xanthan gum is used as hydrogel plug (b) F4, F5, F6 gum kondagogu is used as hydrogel plug (c) F7, F8, F9 guargum is used as hydrogel plug|
Click here to view
| Discussion|| |
It was quite obvious to state that lung function is maximum at 4 pm and minimum at 4 am. When administering this prepared capsule during bedtime, it facilitates the release of drug after 5–6 h lag period and extend the drug release for prolonged period of time to avoid the signs and symptoms of asthma and associated early morning rhinitis.
Appearance of the characteristic peaks in FT-IR spectrum of [Figure 1]a confirms the structure of MLS. The strong absorption peaks at 3400 and 1700 cm −1 along with the functional groups of the excipients in spectrum of drug excipient mixture [Figure 1]c indicates that neither the drug nor the excipients have undergone any chemical reactions. This clearly signifies the compatibility of drug with the selected excipients., The temperature at which the peak was observed in the thermogram of pure drug is attributed to its melting point [Figure 2]a. When compared to the thermal peaks of drug and drug excipient mixture [Figure 2]a and [Figure 2]c, It was found the identicalness in the peak size, area and temperature of the peaks and hence, confirmed the absence of physical interaction of drug with the excipients.
The size of the average microcapsule was increased with increase in concentration of the polymer; this is due to the high surface tension offered by viscous solution and causes reduction of shearing efficiency. Smaller particles have thinner walls and showed faster drug release. Results of the characterization studies of microcapsules are given in [Table 3]. SEM images of M1 and M2 have clearly demonstrated that the particles are spherical in shape with rough surfaces and found in aggregates, which may be due to insufficient concentration of added polymer. However, the SEM images of M4 and M5 showed discrete and spherical particles with smooth surface textures [Figure 3]a,[Figure 3]b,[Figure 3]c,[Figure 3]d.
|Table 3: Results of analysis of release data of montelukast sodium microcapsules as per various kinetic models|
Click here to view
Dissolution profiles of microcapsules demonstrated that, the drug release pattern was biphasic, which is designated by an initial burst effect followed by constant release. The burst release was due to the release of unentrapped drug which was adhered on the surface of microcapsules. Profiles also signified the considerable decrease of drug release with increased concentration of polymers. From the results of kinetic study, it is evident that the drug release from the microcapsules follows first-order kinetics with Fickian diffusion as controlled release mechanism (n = 0.37–0.44) [Table 3]., By considering the above studies, M4 microcapsule formulation was chosen for the preparation of CMP systems.
After treatment with formaldehyde, few capsules were shrunken, and all capsules exhibited a significant reduction in length and diameter. The untreated capsule bodies were dissolved before 15 min whereas treated capsule bodies were stayed; this remains undamaged for 24 h. The reduction in solubility of formaldehyde-treated capsule bodies were due to cross-linking of aldehyde groups of formaldehyde with the amino acids of gelatin by Schiff's base condensation. Hence, the treated capsule bodies were used in the fabrication of CMPSs to carry the drug to hold the release for specific period of time. Study inferred the insignificant traces of free formaldehyde present in cross-linked capsule bodies.
The prepared CMP systems were elegant with smooth surfaces and fulfilling the pharmacopeial limits of weight variation for capsules. The in vitro release profiles [Figure 5]a,[Figure 5]b,[Figure 5]c indicated that the drug release was controlled up to 24 h with varied lag times. The lag time before the drug release depends on the composition and thickness of the hydrogel plug.In vitro dissolution studies revealed that the capsules were remained intact despite acidic environment of simulated gastric fluids during the first 2 h of study. This is stated that, the optimum concentration of CAP was being used in the coating of capsules. In the simulated intestinal fluids (pH 7.4 phosphate buffer), the enteric coat and cap of the capsule were dissolved. Swelling of the hydrogel plug was started due to the slow fluid uptake and converted into gelatinous mass. Later, this gelatinous mass was expelled from the capsule body to release the Eudragit ® microcapsules containing MLS into the simulated colonic fluids (pH 6.8 phosphate buffer).
Chronomodulated pulsincap with xanthan gum as hydrogel plug
From the drug release studies [Figure 5]a, it is evident that F1 and F2 were completely failed in preventing the drug release in the intestine, but F3 was found successful in preventing the drug release to maximum extent as it showed nearly 6 h time lag. All the three plugs were expelled in simulated colonic fluid. Easy expulsion of the plugs was observed due to proper swelling and softening of the plugs which was due to the addition lactose monohydrate in the preparation of plugs. After the expulsion of plugs, controlled release of drug was observed up to 16 h.
Chronomodulated pulsincap with gum kondagogu as hydrogel plug
Formulations prepared by using gum kondagogu as hydrogel plugs showed negligible quantity of drug release [Figure 5]b at the end of 5 h, 4.8%, 2.5%, and 0.0% from F4, F5, and F6, respectively. Hence, it is evident that the concentrations of the gum used in the study were adequate to prevent the early drug release to obtain time lag. Whereas F6 showed no drug release up to 6 h. After the time lag, plugs were expelled very slowly and showed the controlled drug release up to 24 h.
Chronomodulated pulsincap with guargum as hydrogel plug
In vitro dissolution studies [Figure 5]c depicted that the hydrogel plugs of the three formulations, F7, F8, and F9, were ejected in the simulated colonic fluids. F9 formulations have taken nearly 6 h for complete ejection. All the formulations could control the drug release up to 24 h.
From the above discussion, it can be resolved that the anticipated lag phase was observed with gum kondagogu followed by guargum effectively when compared with xanthan gum used as plugs. Xanthan gum plugs were unable to clench the drug release from the capsule for longer period, which may be due to faster erosion of plugs in the selected concentrations.
| Conclusion|| |
In the present research, microcapsule-based CMPSs of MLS were successfully developed and evaluated.In vitro release studies of CMPSs revealed that the fabricated systems could release the drug for an extended period of time after a programmable lag phase. The CMP systems, designed using gum kondagogu as hydrogel plugs, were succeeded in preventing drug release in the physiological pH environment of stomach and small intestine. Thus, the microcapsule-based CMPSs of MLS can be predicted as one of the promising formulation approaches for chemotherapeutic management of nocturnal asthma by giving a new outlook to an existing drug molecule. However, future pharmacokinetic and dynamic studies need to be conducted to evaluate the effects of developed microcapsule-based CMPSs of MLS for the treatment of nocturnal asthma.
The authors are thankful to Dr. D.V.R. Sai Gopal, Co-ordinator, DST Purse Centre, S. V. University, Tirupati-517502, AP, India, for helping to carry out SEM and SIPRA labs, Hyderabad, India, for DSC studies. Authors are also thankful to the management of AKCP for their constant support toward the successful execution of the work.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Turner-Warwick M. Epidemiology of nocturnal asthma. Am J Med 1988;85:6-8.
Shahida B, Shekhar AG. Sleep and asthma. Curr Respir Med Rev 2009;5:202-6.
Horner CC, Mauger D, Strunk RC, Graber NJ, Lemanske RF Jr., Sorkness CA, et al.
Most nocturnal asthma symptoms occur outside of exacerbations and associate with morbidity. J Allergy Clin Immunol 2011;128:977-820.
Bateman JR, Clarke SW. Sudden death in asthma. Thorax 1979;34:40-4.
Khan WH, Mohsenin V, D'Ambrosio CM. Sleep in asthma. Clin Chest Med 2014;35:483-93.
Elcio OV. Mechanisms and therapeutic implications of asthma circadian rhythm. Curr Respir Med Rev 2005;1:171-83.
Pincus DJ, Szefler SJ, Ackerson LM, Martin RJ. Chronotherapy of asthma with inhaled steroids: The effect of dosage timing on drug efficacy. J Allergy Clin Immunol 1995;95:1172-8.
Youan BB. Chronopharmaceutics: Gimmick or clinically relevant approach to drug delivery? J Control Release 2004;98:337-53.
Sunil SA, Srikanth MV, Rao NS, Uhumwangho MU, Latha K, Murthy KV, et al.
Chronotherapeutic drug delivery systems: An approach to circadian rhythms diseases. Curr Drug Deliv 2011;8:622-33.
Sangalli ME, Maroni A, Zema L, Busetti C, Giordano F, Gazzaniga A, et al. In vitro
and in vivo
evaluation of an oral system for time and/or site-specific drug delivery. J Control Release 2001;73:103-10.
Kinget R, Kalala W, Vervoort L, van den Mooter G. Colonic drug targeting. J Drug Target 1998;6:129-49.
Yang L, Chu JS, Fix JA. Colon-specific drug delivery: New approaches and in vitro
evaluation. Int J Pharm 2002;235:1-5.
Maroni A, Zema L, Cerea M, Sangalli ME. Oral pulsatile drug delivery systems. Expert Opin Drug Deliv 2005;2:855-71.
Gazzaniga A, Cerea M, Cozzi A, Foppoli AA, Sangalli ME, Tavella G, et al
. Pharmaceutical Dosage Forms for Time-Specific drug Delivery. Google Patents; 2011.
Bai JP. Pulsatile drug Delivery System. Google Patents; 1998.
Bajpai SK, Bajpai M, Dengre R. Chemically treated hard gelatin capsules for colon-targeted drug delivery: A novel approach. J Appl Polym Sci 2003;89:2277-82.
Yalavarthi PR, Vulava J, Vadlamudi HC, Balambhaigari RY, Nair R. Modified pulsincap of ibuprofen – A novel approach for chronotherapy. Curr Drug Deliv 2013;10:299-308.
Patel DM, Jani RH, Patel CN. Design and evaluation of colon targeted modified pulsincap delivery of 5-fluorouracil according to circadian rhythm. Int J Pharm Investig 2011;1:172-81.
Kemp JP, Dockhorn RJ, Shapiro GG, Nguyen HH, Reiss TF, Seidenberg BC, et al.
Montelukast once daily inhibits exercise-induced bronchoconstriction in 6- to 14-year-old children with asthma. J Pediatr 1998;133:424-8.
Kumar S, Awasthi R. Development of montelukast sodium loaded niosomal carriers by film hydration technique. Antiinflamm Antiallergy Agents Med Chem 2015;14:63-78.
Alavi AK, Squillante E 3rd
, Mehta KA. Formulation of enterosoluble microparticles for an acid labile protein. J Pharm Pharm Sci 2002;5:234-44.
Si-Nang L, Carlier PF, Delort P, Gazzola J, Lafont D. Determination of coating thickness of microcapsules and influence upon diffusion. J Pharm Sci 1973;62:452-5.
Tengroth C, Gasslander U, Andersson FO, Jacobsson SP. Cross-linking of gelatin capsules with formaldehyde and other aldehydes: An FTIR spectroscopy study. Pharm Dev Technol 2005;10:405-12.
Mastiholimath VS, Dandagi PM, Jain SS, Gadad AP, Kulkarni AR. Time and pH dependent colon specific, pulsatile delivery of theophylline for nocturnal asthma. Int J Pharm 2007;328:49-56.
Binns J, Stevens HN, McEwen J, Pritchard G, Brewer FM, Clarke A, et al
. The tolerability of multiple oral doses of Pulsincap™ capsules in healthy volunteers. J Control Release 1996;38:151-8.
Xu C, Zhang JS, Mo Y, Tan RX. Calcium pectinate capsules for colon-specific drug delivery. Drug Dev Ind Pharm 2005;31:127-34.
Ibrahima Y, Malika LS, Frederic B, Mohamed S. Combination of time-dependent and ph-dependent system for intestinal delivery of 4-aminosalicylic acid based pellets. Lett Drug Dev Discov 2009;6:278-85.
Cheng G, An F, Zou MJ, Sun J, Hao XH, He YX, et al.
Time- and pH-dependent colon-specific drug delivery for orally administered diclofenac sodium and 5-aminosalicylic acid. World J Gastroenterol 2004;10:1769-74.
Khan MZ, Prebeg Z, Kurjaković N. A pH-dependent colon targeted oral drug delivery system using methacrylic acid copolymers. I. Manipulation of drug release using eudragit L100-55 and eudragit S100 combinations. J Control Release 1999;58:215-22.
Efentakis M, Koligliati S, Vlachou M. Design and evaluation of a dry coated drug delivery system with an impermeable cup, swellable top layer and pulsatile release. Int J Pharm 2006;311:147-56.
Vuppalapati L, Cherukuri S, Neeli V, Yeragamreddy PR, Kesavan BR. Application of central composite design in optimization of valsartan nanosuspension to enhance its solubility and stability. Curr Drug Deliv 2016;13:143-57.
Alagdar GS, Oo MK, Sengupta P, Mandal UK, Jaffri JM, Chatterjee B, et al.
Development of a binary carrier system consisting polyethylene glycol 4000-ethyl cellulose for ibuprofen solid dispersion. Int J Pharm Investig 2017;7:142-8.
Mora PC, Cirri M, Mura P. Differential scanning calorimetry as a screening technique in compatibility studies of DHEA extended release formulations. J Pharm Biomed Anal 2006;42:3-10.
Rodríguez M, Vila-Jato JL, Torres D. Design of a new multiparticulate system for potential site-specific and controlled drug delivery to the colonic region. J Control Release 1998;55:67-77.
Chordiya MA, Gangurde HH, Senthilkumaran K, Kothari LP. Formulation development and in vitro
evaluation of gastroretentive hollow microspheres of famotidine. Int J Pharm Investig 2011;1:105-11.
Kiliçarslan M, Baykara T. The effect of the drug/polymer ratio on the properties of the verapamil HCl loaded microspheres. Int J Pharm 2003;252:99-109.
Higuchi T. Mechanism of sustained-action medication. theoretical analysis of rate of release of solid drugs dispersed in solid matrices. J Pharm Sci 1963;52:1145-9.
Ritger PL, Peppas NA. A simple equation for description of solute release II. Fickian and anomalous release from swellable devices. J Control Release 1987;5:37-42.
Sarasija SH. A colon-specific drug delivery systems. Indian J Pharm Sci 2000;62:1-8. [Full text]
Talukdar MM, Plaizier-Vercammen J. Evaluation of xanthan gum as a hydrophilic matrix for controlled-release dosage form preparations. Drug Dev Ind Pharm 1993;19:1037-46.
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5]
[Table 1], [Table 2], [Table 3]